EUR (€)
Masonry Supported Joist Hanger (JHM)
_x000d_
_x000d_ The JHM is the industry standard joist hanger for supporting timber joists, beams and trussed rafters from masonry walls.
_x000d_
_x000d_ They feature an inspection slot at the base of the hanger to aid uinspection fom the ground. It's top flange provides the widest area of contact with masonry support to give superior perfomance.
_x000d_
_x000d_ Options:
_x000d_
_x000d_ Return configuration provides additional support by wrapping around three sides of the block.
_x000d_
_x000d_ Straddle configuration provides two hangers connected across the top of the support.
_x000d_
_x000d_ The JHM can be shot fired to steel.
_x000d_
_x000d_ The JHM up to 61mm in width can also be skewed between 5 and 45 degrees.
_x000d_
_x000d_ The JHM is the industry standard joist hanger for supporting timber joists, beams and trussed rafters from masonry walls.
_x000d_
_x000d_ They feature an inspection slot at the base of the hanger to aid uinspection fom the ground. It's top flange provides the widest area of contact with masonry support to give superior perfomance.
_x000d_
_x000d_ Options:
_x000d_
_x000d_ Return configuration provides additional support by wrapping around three sides of the block.
_x000d_
_x000d_ Straddle configuration provides two hangers connected across the top of the support.
_x000d_
_x000d_ The JHM can be shot fired to steel.
_x000d_
_x000d_ The JHM up to 61mm in width can also be skewed between 5 and 45 degrees.
